CHASSIS FRAME
|
|
-
|
| 40-1 |
To sandblast and powder coat chassis frame in a choice of colours. |
£ |
| 40-2 |
To sandblast and powder coat rear uprights and all wishbone / suspension links. |
£ |
| 40-3 |
To chrome plate all wishbone / suspension links with sandblasted and powder coated rear uprights. |
£ |
| 40-4 |
Aluminium floorpan CNC cut to shape. |
£ |
| 40-5 |
Aluminium panel set. CNC cut to shape ( 47 parts) |
£ |
| 40-6 |
3/4" polished Aluminium angle. ( 13' ) |
£ |
| 40-7 |
500 Aluminium sealed pop-rivets. |
£ |
| 40-7A |
Riv nut set |
£ |
| 40-8 |
Polyurethane sealant. ( per cartridge) |
£ |
| 40-9 |
Build-up stands. (pair) |
£ |
SUSPENSION
|
|
-
|
| 40-10 |
Complete suspension parts package including the upper and lower front balljoints, Aluminium front uprights, Aluminium front hubs, front wheel bearings, rear bearing housings, rear wheel bearings, rear stub axles, and rear drive flanges, supplied complete with wheel studs and all nuts, bolts, washers and split pins etc. |
£ |
| 40-12 |
Coil-over adjustable shock absorbers with springs. ( set of 4 ) |
£ |
| 40-13 |
Front and rear anti-roll bar kits including all drop links, bushes and fixings. |
£ |
STEERING
|
|
-
|
| 40-14 |
Steering column centre shaft with quick release boss. |
£ |
| 40-15 |
Steering rack. ( R.H.D. ) |
£ |
| 40-16 |
Steering rack. ( L.H.D. ) |
£ |
| 40-17 |
Steering rack mounting kit. |
£ |
| 40-18 |
Track rod ends. (pair) |
£ |
| 40-19 |
Steering coupler. |
£ |
| 40-20 |
Steering wheel ( leather ) with replica boss. |
£ |
HYDRAULIC SYSTEM
|
|
-
|
| 40-21 |
Brake / clutch pedal assembly (bias adj) |
£ |
| 40-21A |
Brake / Clutch pedal assembly (Dual circuit) |
£ |
| 40-22 |
Brake master cylinder and level sensor (bias adj) Each |
£ |
| 40-22A |
Dual circuit brake master cylinder with level sensor |
£ |
| 40-23 |
Clutch master cylinder with clevis. |
£ |
| 40-24 |
Front 4 pot brake kit including calipers, brackets, discs, pads and fixings. |
£ |
| 40-25A |
Front 6 pot brake kit including calipers, brackets, discs, pads and fixings. |
£ |
| 40-25 |
Rear 4 pot brake kit including calipers, brackets,discs, pads and fixings. |
£ |
| 40-26 |
Remote brake servo. ( 2 required ) |
£ |
| 40-27 |
Brake servo fitting kit. ( pair ) |
£ |
| 40-28 |
Brake / clutch pipe unions and bulkhead fittings. |
£ |
| 40-29 |
Brake / clutch pipe set with clips. |
£ |
| 40-30 |
Brake light switch. |
£ |
| 40-31 |
Brake / clutch flexible braided hose set. ( 5 hoses ) |
£ |
| 40-31 |
Clutch slave cylinder. |
£ |
HANDBRAKE / ACCELERATOR
|
|
-
|
| 40-33 |
Handbrake lever. |
£ |
| 40-34 |
Handbrake cables. (pair) |
£ |
| 40-35 |
Handbrake compensator with fittings. |
£ |
| 40-36 |
Accelerator pedal. |
£ |
| 40-37 |
Accelerator cable. |
£ |
COOLING SYSTEM
|
|
-
|
| 40-39 |
Aluminium radiator. |
£ |
| 40-40 |
Twin radiator fan kit. |
£ |
| 40-41 |
Radiator water pipe set including all silicone hoses, brackets and clips. |
£ |
| 40-42 |
Heater system including on/off valve and trunking with vents. |
£ |
| 40-43 |
Heater water hose set and clips. |
£ |
| 40-44 |
Large capacity alloy header tank and cap. |
£ |
| 40-45 |
90 deg thermostat housing. ( Ford 302 ) |
£ |
FUEL SYSTEM
|
|
-
|
| 40-46 |
Alloy fuel tanks. ( Internal baffles ) (pair) |
£ |
| 40-47 |
Fuel tank filler necks and pipes. (pair) |
£ |
| 40-48 |
Replica fuel tank filler cap with stainless steel fixings. (each) |
£ |
| 40-49 |
Competition fuel pump with unions. (each) |
£ |
| 40-50 |
Fuel filter. (each) |
£ |
| 40-51 |
Fuel tank sender units. (pair) |
£ |
| 40-52 |
Braided fuel hose kit. ( twin pumps and filters ) |
£ |
| 40-53 |
Braided fuel hose kit. ( single pump and filter ) |
£ |
| 40-54 |
One way fuel valves. (Required with twin pumps only) (each) |
£ |
ENGINE / TRANSAXLE
|
|
-
|
| 40-55 |
Ford 302 small block V8 engine. with alloy heads developing 350 BHP, supplied ready to run with IVA date certificate. |
£ |
| 40-55A |
Coyote V8 engine. 412 BHP Fuel injected, quad cam, all alloy with Euro V emissions. Modified and ready for installation |
£ |
| 40-56 |
5 speed UN1 transaxle, RH change, modified 2nd & 3rd gears and drilled out oil ways. |
£ |
| 40-57 |
Limited slip differential gearbox option. |
£ |
| 40-57A |
Single Part Gearbox Input Shaft |
£ |
| 40-58 |
6 speed gearbox with limited slip diff. |
£ |
| 40-59 |
Engine mounts. (pair) |
£ |
| 40-60 |
Gearbox mounts. (pair) |
£ |
| 40-61 |
Cast Aluminium bellhousing to convert renault 20/21/25 and 30 gearboxs to Ford 289/302 and 351W engines complete with first motion shaft, clutch release arm, engine back plate and all fixings. |
£ |
| 40-61A |
Coyote V8 aluminium bellhousing conversion kit |
£ |
| 40-62 |
H/D clutch kit including centre plate, cover plate, & release bearing. |
£ |
| 40-62A |
Coyote V8 H/D clutch kit |
£ |
| 40-63 |
H/D starter motor for bellhousing. |
£ |
| 40-64 |
CV joint adaptors. ( Renault to Granada) (pair) |
£ |
| 40-65 |
Rear drive shafts. (pair) |
£ |
| 40-66 |
CV joints complete including lockplates, circlips, washers and bolts. (set of 4) |
£ |
| 40-67 |
Right hand rod type gear linkage complete including selector lever and all fixings. (please state 4 or 5 SPD) |
£ |
| 40-67A |
Central cable gear change system complete |
£ |
| 40-67B |
Reverse Lockout mechanism |
£ |
| 40-68 |
Ford V8 exhaust system (full cross over) looks and sounds like the original GT40. Systems feature a unique No. 7 pipe which results in greater exhaust to body clearances. All systems are test fitted. |
£ |
| 40-69 |
Exhaust system as above 1 3/4" dia. For large heads. |
£ |
| 40-69A |
Coyote V8 exhaust system including headers, collectors,silencers and catalytic converters. |
£ |
| 40-70 |
Exhaust heat shield in stainless steel. |
£ |
| 40-71 |
Aluminium asbestos cloth. ( 1 SQ Metre ) |
£ |
BODY FITTINGS
|
|
-
|
| 40-72 |
Front and rear body mount bars with fixings. |
£ |
| 40-73 |
Door hinges with fixings. (pair) |
£ |
| 40-74 |
Front screen with black border. 'E' marked. |
£ |
| 40-75 |
Front screen fitting kit including seals and adhesive. |
£ |
| 40-76 |
Glass rear bulkhead window ( 'E' marked) with mounting frame |
£ |
| 40-76A |
Plastic rear bulkhead window with mounting frame |
£ |
| 40-77 |
Impact resistant window/light cover pack including side windows with opening flaps, rear window and headlight / spotlight covers all formed to shape with stainless steel fixings and side window flap fittings. |
£ |
| 40-77A |
Glass rear window with black border. 'E' marked. |
£ |
| 40-77B |
Curved acrylic rear window formed to shape |
£ |
| 40-78 |
Front and rear body section stays. |
£ |
| 40-79 |
Rear body section undertray in Aluminium. |
£ |
| 40-80 |
Rear body louvered engine cover panel in polished aluminium with fixings. |
£ |
| 40-81 |
Rear body louvered back panels in polished aluminium with fixings. (pair) |
£ |
| 40-82 |
Replica dash demister grille as original |
£ |
| 40-83 |
Replica exterior door handles. ( polished alloy ) (pair) |
£ |
| 40-84 |
Door handle recess mouldings, catches, strikers, polished interior release handles, pushrods and return springs complete with all fixings. (pair) |
£ |
| 40-85 |
Door lock barrels. (pair) |
£ |
| 40-86 |
Front & rear body section over centre catches in stainless steel with fixings. (set of 4 ) |
£ |
| 40-87 |
Front and rear body section locators. ( set of 8 ) |
£ |
| 40-87A |
Side sill rubber strip |
£ |
| 40-88 |
Dzus fasteners. ( set of 6 ) |
£ |
| 40-88A |
Front body section bonnet stops (pair) |
£ |
| 40-89 |
Rear body section bonnet pins (chrome) with brackets. (pair) |
£ |
| 40-90 |
Panel locks. (pair) |
£ |
| 40-91 |
Racing wing mirrors. (chrome on Brass) (pair) |
£ |
| 40-92 |
Windscreen wiper motor, drive cable, spindle, stainless steel wiper arm and blade. |
£ |
| 40-93 |
Windscreen washer kit including container, pump, tubing and jets. |
£ |
| 40-94 |
Door seals. (pair) |
£ |
| 40-94A |
Roof section rain channel edge finisher |
£ |
| 40-95 |
G.R.P front / rear light box rear cover panels. (set of 4) |
£ |
| 40-96 |
Gurney roof bubble moulding. |
£ |
| 40-97 |
Door top cap strips (prevents door top lift at high speeds, as fitted to all original GT40's. (pair) |
£ |
| 40-98 |
Side sill stripes. ( Ford GT etc ) (pair) |
£ |
| 40-99 |
Front and rear air intake grilles. (set of 4) |
£ |
| 40-100 |
Radiator mesh. |
£ |
| 40-102 |
Removable door top conversion. Allows the removal of the door top roof panels in warm weather converting the car into an open top. To replace the panels simply locate in position and tighten Two fasteners. |
£ |
ELECTRICAL SYSTEM
|
|
-
|
| 40-103 |
Full and complete wiring harness including relays, battery leads and hazzard lights circuit. Harness is made to measure and supplied fully terminated. |
£ |
| 40-104 |
Front headlight units with bulbs. (pair). includes side lights |
£ |
| 40-105 |
Front headlight mounting frames. (pair) |
£ |
| 40-106 |
Front driving light units with bulbs (pair) |
£ |
| 40-107 |
Front indicator lights with bulbs. (pair) |
£ |
| 40-107A |
Side marker indicators (pair) |
£ |
| 40-108 |
Rear tail lights (as original) with bulbs. (pair) |
£ |
| 40-109 |
Rear number plate lights with bulbs. (pair) |
£ |
| 40-110 |
Rear fog light with bulb. |
£ |
| 40-111 |
Rear reverse light with bulb. |
£ |
| 40-112 |
Complete set of dash switches (Lucas as original) set of 12, including hazzard lights, brake test switches and dash warning lights. |
£ |
| 40-113 |
Full set of dash instruments including 220 mph electronic seedo, V8 tacho, oil pressure, water temperature, volts and fuel gauges with sensors. |
£ |
| 40-114 |
Oil temperature gauge with sensor. |
£ |
| 40-115 |
Speedometer drive cable. |
£ |
| 40-116 |
Alternator for 302 engine |
£ |
| 40-117 |
Alternator mounting kit with belt for 302 engine |
£ |
| 40-119 |
G.R.P battery box moulding with seal and fixings. |
£ |
| 40-120 |
Horn. |
£ |
INTERIOR
|
|
-
|
| 40-121 |
Interior G.R.P panel set including water pipe cover, gear linkage cover and water pump pulley cover. |
£ |
| 40-122 |
GRP dash moulding RHD or LHD. |
£ |
| 40-122A |
Dash end door closure panels (pair) |
£ |
| 40-123 |
Interior trim pack including carpet set, door trim panels, handbrake gator and door check straps in a choice of colours with leatherette trim. |
£ |
| 40-124 |
As above in leather trim. |
£ |
| 40-125 |
To cover dash in leatherette. |
£ |
| 40-126 |
As above in leather. |
£ |
| 40-127 |
Replica seat with brass rings in black leatherette. (each) |
£ |
| 40-128 |
As above in the colour of your choice. |
£ |
| 40-129 |
Replica seat with brass rings in black leather. (each) |
£ |
| 40-130 |
As above in the colour of your choice. |
£ |
| 40-131 |
Low profile seat runners. (Per seat) |
£ |
| 40-132 |
4 strap 3 point seat belt harnesses. ( Red, Blue, or Black ) (pair) |
£ |
| 40-133 |
Interior rear view mirror. |
£ |
| 40-134 |
Air conditioning system complete with built in heater unit. |
£ |
| 40-135 |
Dash bullseye air vents with trunking. (pair) |
£ |
| 40-137 |
Choke cable with knob. |
£ |
WHEELS AND TYRES
|
|
-
|
| 40-138 |
BRM/Halibrand replica wheels complete with wheel spinners, lock plates and wheel nuts. 15" diameter in a choice of colours. (set of 4) |
£ |
| 40-139 |
BRM/Halibrand replica wheels complete with wheel spinners, lock plates and wheel nuts. 17" diameter in a choice of colours. (set of 4) |
£ |
| 40-139A |
Classic build on 15" and 17" wheel rims (set of 4) |
£ |
| 40-140 |
Set of 4 tyres to suit 15" diameter wheels. |
£ |
| 40-141 |
Set of 4 tyres to suit 17" diameter wheels. |
£ |
| 40-142 |
Knock on wheel adaption kit including hub adapters, drive pins and original wheel spinners. set of 4 |
£ |
LATEST OPTIONS AND ACCESSORIES
|
|
-
|
| 40-143 |
Single vent front hatch panel. |
£ |
| 40-144 |
Rear body section periscope vents. (pair) |
£ |
| 40-145 |
Fully braided brake / clutch hose set with clips. |
£ |
| 40-146 |
Gulf style wheel arch set to fit up to 12" wide rear wheels. (pair) |
£ |
| 40-147 |
Body fit and painting service. |
£ |
| 40-149 |
Ford SVO GT40 performance engine. |
£ |
| 40-150 |
To upholster door bins in leatherette. (pair) |
£ |
| 40-151 |
As above in leather. (pair) |
£ |
| 40-152 |
Race style seat in leatherette. (each) |
£ |
| 40-153 |
4 point seat harnesses. (Blue, Red or Black) (pair) |
£ |
| 40-154 |
Harness shoulder pads. (Blue, Red or Black) (pair) |
£ |
| 40-155 |
Fully rose jointed suspension option. For race use only. |
£ |
| 40-158 |
Battery master cut off switch. |
£ |
| 40-159 |
On board fire extinguisher system. |
£ |
| 40-160 |
Remote oil cooler kit. |
£ |
| 40-161A |
Ceramic coated exhaust system option. |
£ |
| 40-163 |
Light weight GRP body option. |
£ |
| 40-164 |
48 IDF weber carb kit incuding carbs, inlet manifold, air horns, throttle linkage & fuel hoses. |
£ |
| 40-165 |
As above but 48 IDA carbs. |
£ |
| 40-166 |
EFI injection system complete. |
£ |
| 40-167 |
Fuel injection system complete including throttle bodies, air horns, inlet manifold, linkage, fule lines, fuel pump, sensors, ECU unit and wiring etc. |
£ |
| 40-168 |
Six point roll cage |
£ |
| 40-170 |
Side window ball vents (Pair) |
£ |
| 40-171 |
Seat booster cushions |
£ |
| 40-172 |
Gulf style engine vent panel |
£ |
| 40-173 |
Gulf style rear body vents (Pair) |
£ |
| 40-174 |
GT40 indoor car cover |
£ |
| 40-175 |
Removable dash switch panels (Pair) |
£ |
| 40-176 |
Rear fog light (SVA compliant) |
£ |
| 40-177 |
Cast Aluminium bellhousing. Rover/Chevy to Renault |
£ |
| 40-178 |
Gurney Eagle Rocker Covers (Pair) |
£ |
| 40-180 |
0.7 fifth gear set |
£ |
| 40-181 |
Original type side window flap fittings Per car set |
£ |
| 40-182 |
Exhaust megaphone pipes (pair) |
£ |
| 40-183 |
Megaphone silencer inserts (pair) |
£ |
| 40-184 |
Billboard tyre lettering kits. Avon, Goodyear, Eagle etc. |
£ |
| 40-185 |
Rear hand brake caliper kit including Calipers, pads, brackets and bolts etc. |
£ |
| 40-186 |
Lucas 608 rear view mirror and mount kit |
£ |
| 40-187 |
Hartwell replica catch set (set of 4) |
£ |
| 40-188 |
Aluminium rear spoiler. MK1 and MK2 versions with fixings |
£ |
| 40-189 |
Tornado Sports Cars 'T' shirt. S,M,L and XL sizes with logo |
£ |
GULF REPLICA PARTS
|
|
-
|
| 40-190 |
Gulf rear wheel arch kit. includes side sill flares (pair) |
£ |
| 40-191 |
Gulf single vent front hatch panel |
£ |
| 40-192 |
Gulf louvered roof panel insert in aluminium |
£ |
| 40-193 |
Gulf front flush indicators with mountings |
£ |
| 40-194 |
Gulf front lower driving lights with mountings |
£ |
| 40-195 |
Gulf race number lights (set of 3) |
£ |
| 40-196 |
Gulf Winged Dzus fasteners (set of 6) |
£ |
| 40-197 |
Gulf front wheel spinners |
£ |
| 40-198 |
Gulf rear ID light |
£ |
| 40-199 |
Gulf racing decal sets. 1075 etc. |
£ |
MK2 REPLICA PARTS
|
|
-
|
| 40-200 |
MK2 front wing hump mouldings (pair) |
£ |
| 40-201 |
MK2 Rear spoiler in aluminium with fixings |
£ |
| 40-202 |
MK2 rear tail lights |
£ |
| 40-203 |
MK2 Engine cover top scoop moulding |
£ |
| 40-204 |
MK2 Rear body periscope scoops (pair) |
£ |
| 40-205 |
MK2 Rear body mesh grilles |
£ |
| 40-206 |
MK2 Louvered roof panel insert in aluminium |
£ |
All parts are supplied packed and part numbered and include all required fixings which are Zinc plated or stainless steel. |
